GSM Mobile starter (3 phase)

Buy Now

GSM Remote Pump Controller is a device which can control and monitor electric motors, agriculture pump or submersible pump sets through mobile phone. This is a GSM-based mobile operated pump controller to switch ON and OFF pump sets or an electric motor with a cell phone from a remote location. This SMS or GSM pump motor controller helps the farmer to handle agricultural pump sets easily. The farmer can set up schedules for automatically start and stop the pump. It also helps the farmers to save a life from snake bite in the night time, saves water, time, and electricity. One SIM Card is required for its operation.

FEATURES:

  • Size: 165 x 162 x 67 mm
  • Supply: 415 VAC 50Hz (3 Phase)
  • Protection: Single Phase, Reverse Phase, Overload, Dry Run, Under Voltage, Over Voltage & Voltage Unbalance (All Settable)
  • Indication:) Network, Power, All Fault Indication of above
  • Time Setting:) On delay timer (0.5-5Min), Star delta timer (2-30 Sec) & Reset time delay (0.5-5Hrs)
  • Motor Power: 1-50 Hp motor compatible
  • Voltage : Shows voltage of phase
  • Current : Shows current consumption during motor running
  • Mobile operated up to 5 users
  • Rechargeable battery inbuilt, 24 hrs backup
  • IVRS technology
  • Pump on/off with SMS or CALL
  • Auto/Manual mode enabled
  • Set any fault with mobile setting Multiple On-off timer facility
  • Power On SMS and call alert
  • Feedback Call & SMS Alert
  • Recharge Reminder
  • Warranty Check Facility via SMS
  • Dry Run facility
  • Will shut down the motor and keep it safe if the following error occurs
  • -Two-phase lighting
  • -Electrical face turning upside down
  • -When the motor is overloaded, it turns the motor off.
  • -Dry runs when the motor fails to take up water.

FAQ's

What is a GSM Mobile Starter (3 Phase) and its function?

GSM Mobile Starter (3 Phase) is a remote control for pumps that can be used with any mobile phone. The control of pumps or motors is ON or OFF via GSM/SMS service.

What kind of protection is implemented by GSM Mobile Starter?

There is the following list of protections installed: Single Phase, Reverse Phase, Overload, Dry Run, Voltage. Users can configure all of these to make sure motors function safely.

Is it possible to automate the process using GSM Mobile Starter (3 Phase)?

Absolutely! You can create automatic control systems for your pumps to improve irrigation by controlling the water usage more efficiently.

What size of motor is the GSM Mobile Starter designed for?

It is suitable for motors ranging in size from 1HP to 50 HP, which covers agriculture pumps, submersible motors, industrial application.

What should you provide to get started with the GSM Mobile Starter (3 Phase)?

All you need is just one SIM card for communication via GSM technology.